Hrg. Johann Mayrwöger, Wolfgang Reichl, Christian Krutzler, Bernhard Jakoby,
"Design of a NDIR gas sensor with two non-symmetric Fabry-Perot absorber-structures working as IR-emitter and IR-detector"
, in SPIE: SPIE Photonics Europe / Optical Sensing and Detection, Vol. 7726, Seite(n) 77260J, 5-2010, ISBN: 9780819481993
Original Titel:
Design of a NDIR gas sensor with two non-symmetric Fabry-Perot absorber-structures working as IR-emitter and IR-detector
Sprache des Titels:
Englisch
Original Buchtitel:
SPIE Photonics Europe / Optical Sensing and Detection
Original Kurzfassung:
Every gas (e.g. CO2) absorbs IR-radiation at individual gas specific IR-wavelengths. Non-dispersive infrared (NDIR) gas
sensors exploit this property for gas monitoring. Such sensors are used in various applications, e.g. for control of air
quality in office buildings or cars. This is a big market for low cost sensors. A NDIR sensor consists basically of three
components: an IR-emitter, a chamber containing the sample gas, and an IR-detector with a filter for the observed
wavelength. Commercially available systems use broadband IR-emitters (e.g.: micro-lamps) in combination with
thermopile or pyroelectric detectors fabricated with a narrowband gas-specific IR-filter, e.g., an interference filter. We
devised a concept for a simple and cost-effective NDIR-gas sensor based on two non-symmetric Fabry-Perot absorberstructures
as IR-emitter and as IR-detector where no additional interference filter is needed. The presented sensor
combines thin layer technology with optical sensing techniques. The system was first analyzed using ray tracing models
based on a Monte Carlo method in order to model the response function of the system’s sample chamber. For our results,
the sample gas is CO2 where the major absorption is centered around 4.26μm.
Forschungs-