Active Compensation of Roll Eccentricity in Rolling Mills
Sprache des Titels:
Englisch
Original Buchtitel:
Proceedings The 1998 IEEE Industry Applications Conference, Thirty-Third IAS Annual Meeting
Original Kurzfassung:
This paper is concerned with the active compensation of the roll eccentricity-induced periodic disturbances in the strip exit thickness of hot and cold rolling mills. The roll eccentricity may be caused by different reasons, like e.g. inexact roll grinding or nonuniform thermal expansion of the rolls. The increasing demands on the thickness tolerances require newe methods for the active compensation of the contribution of the roll eccentricity to the final thickness deviation. The presented method is based on the factorization approach over the set of stable transfer functions in combination with an adaptive least mean squares algorithm derived from the projection theorem. Here we take advantage of the fact that the eccentricity caused disturbance is periodic with a frequency proportional to the measured angular velocity of the rolls. Furthermore, it turns out that the presented concept fits the coventional control circuit of automatic gauge control in an optimal way. Simulation results for a cold rolling mill and measurement results for a hot strip mill demonstrate the feasibility and the excellent performance of the design.
Sprache der Kurzfassung:
Englisch
Seitenreferenz:
2199-2206
Erscheinungsmonat:
10
Erscheinungsjahr:
1998
ISBN:
0-7803-4943-1
Anzahl der Seiten:
8
Notiz zur Publikation:
Kugi A., Haas W., Schlacher K., Aistleitner K., Frank H., Rigler G.: Active Compensation of Roll Eccentricity in Rolling Mills, In: The 1998 IEEE Industry Applications Conference, Thirty-Third IAS Annual Meeting, Oktober 12-15 1998, St. Louis, USA, ISBN: 0-7803-4943-1, pp. 2199-2206, 1998.
Forschungs-