Bernhard Rameder, Hubert Gattringer, Andreas Müller,
"Geometric Robot Calibration Using a Calibration Plate"
, in D. Pisla, G. Carbone, D. Condurache, C. Vaida: Advances in Service and Industrial Robotics - RAAD 2024, Serie Mechanisms and Machine Science, Vol. 157, Springer Nature, Switzerland, Seite(n) 309-317, 6-2024, ISBN: 978-3-031-59256-0
Original Titel:
Geometric Robot Calibration Using a Calibration Plate
Sprache des Titels:
Englisch
Original Buchtitel:
Advances in Service and Industrial Robotics - RAAD 2024
Original Kurzfassung:
In this paper a new method for geometric robot calibration is introduced, which uses a calibration plate with precisely known distances between its measuring points. The relative measurement between two points on the calibration plate is used to determine predefined error parameters of the system. In comparison to conventional measurement methods, like laser tracker or motion capture systems, the calibration plate provides a more mechanically robust and cheaper alternative, which is furthermore easier to transport due to its small size. The calibration method, the plate design, the mathematical description of the error system as well as the identification of the parameters are described in detail. For identifying the error parameters, the least squares method and a constrained optimization problem are used. The functionality of this method was demonstrated in experiments that led to promising results, correlated with one of a laser tracker calibration. The modeling and identification of the error parameters is done for a gantry machine, but is not restricted to that type of robot.
Forschungs-